The vPod Pro Smart Vibration Meter can simultaneously measure the vibration value, bearing status and temperature of the machine, and it has an optional spectrum analysis module and route module suitable for mass data collection function, as well as the iSee predictive maintenance software for full-featured predictive maintenance operation.

• IP65-rated dust- and water-resistant case with drop-resistant silicone cover
• 3.5" color screen for intuitive and easy-to-understand UI - Built-in 24G flash memory with ample storage space
• Innovative sensor design for simultaneous measurement of vibration, bearing status and body tem-perature
• Optional spectrum analysis function and route function for mass data collection to predict vibra-tion and to monitor temperature trends
• Camera on the back can be used to store data with a photo taken on site as a note
• Supports Bluetooth headset diagnosis function
• Can be used with USB 2.0 and other transmission interfaces

An A52-IR sensor with an Innovative design

The vPod Pro is equipped with our innovative multi-functional sensor—A52-IR—which has an internal piezoelectric acceleration sensor to accurately measure frequencies ranging from 1 to 10 kHz. A strong magnetic base is used under the sensor to mount it on the object to be measured. This type of mounting enhances the transmission of high frequency signals and ensures accurate testing of bearings, gears, and other high frequency signals. In addition, an infrared temperature sensor is installed under the sensor, and the vibration signal and temperature of the object can be measured simultaneously through the hole in the center of the magnetic base.

Total vibration detection

Total vibration is the most basic vibration measurement used to detect low frequency vibration problems of rotating equipment, such as dynamic balance problems of rotating parts, shaft alignment, and looseness problems and can be determined initially by total vibration detection. The vPod Pro has built-in ISO 10816-3 vibration standard, which can present the alarm status of vibration value in green, yellow and red colors, so that users can easily read or interpret them. If necessary, users can also edit their own vibration standard values and use them on vPod Pro.

Bearing status detection

vPod Pro measures vibration waveform ranging from a bandwidth of around 1 kHz~10 kHz and takes the "true peak" to detect the status of the bearing. This type of measurement can start to detect and track problems in the early stages of bearing damage. With a built-in bearing condition alarm system, vPod Pro displays the bearing measurement data in green, yellow and red background colors, allowing users to easily understand the health of the bearing and take necessary maintenance measures.

Bluetooth headset diagnostic function

The vPod Pro has a built-in Bluetooth function that allows you to connect to a Bluetooth headset. After each measurement, vPod Pro will automatically play the sound of vibration for 2~8 seconds through the Bluetooth headset. Experienced users can use this listening function as an aid to deter-mine if the device is abnormal.

Camera function

The vPod Pro has a built-in camera on the back, which allows you to store measurement data and attach a picture taken on site as a record. This photo will be linked to the measurement data and sent back to the PC as an attachment when viewing the data.

Spectrum analysis function

The vPod Pro Spectrum (optional) is an advanced version with the spectrum measurement function. In addition to measuring the total vibration, bearing status and temperature, the spectrum is also measured to diagnose vibration problems. The range of the measured spectrum is from 1 kHz band-width with 1600 bars of resolution and 10 kHz bandwidth with 6400 bars of resolution.

Route measurement function

vPod Pro Route is the full-featured version. In addition to all of the above-mentioned features, it can also perform a large amount of data collection according to pre-scheduled route settings. This must be accompanied by exclusive iSee software to create a database and manage all measurement data. In the scheduling mode, vPod Pro not only measures the basic total vibration, bearing status and temperature, but also stores a separate raw waveform of the vibration signal. This raw waveform is automatically converted into waveforms, two spectrums, Envelope Spectrum, Cepstrum and other functions when inputted into iSee software, providing a complete set of predictive maintenance monitoring parameters, filtering out problematic measurement points, tracking trend changes, diagnosing problems and generating various reports.