- Vibration and temperature-type
- Simple monitoring method that is rapid and cost-effective
- Vibration can accelerate output, velocity, displacement
- Provide multiple filtering options to meet the measurement conditions in the field.
- A 4-20mA current signal output for a control room DCS or PLC system monitoring.
- Provides dynamic voltage and dynamic signal terminals for hard-wired online systems terminals
- Raw voltage signal output: BNC connector for inspection data collection and spectrum analysis.
- Explosion-proof application: Din rail fixed base plate for explosion-proof box installation.
- DIN rail backplane design
- Continuous operation equipment monitoring, such as pumps, motors, wind turbines, cooling tow-ers, compressors, gearboxes and other production equipment
- Accelerometer: IEPE type
- Input signal accelerometer sensitivity: 10mV/g (not applicable to displacement), 100mV/g, 500mV/g
- Input signal temperature sensitivity: 10mV/°C (DC signal)
- Output vibration signal types: Acceleration, Velocity, Displacement
- Sensor power supply: IEPE 20V ± 1V, 4mA ± 10%
- Converter power requirement: DC24V, current consumption: <3W
- Bandpass filtering range: - Low frequency cut-off: 2Hz (not applicable to displacement), 5Hz, 10Hz, 20Hz - High frequency cut-off: 1KHz, 2KHz, 5KHz (not applicable to displacement), 10KHz (not ap-plicable to velocity, displacement)
- Detection mode options: P(peak), R(RMS), PP (peak - peak)
- 4-20mA full-scale corresponds to vibration value (please refer to the catalog)/temperature 120°C.
- Environment -20°C~60°C
- 35mm Din Rail fixed
- Size: 17.5x125x100 (mm, W*D*H)
- Dynamic balance
- Vibration inspection
- Modal and operational vibration measurement
- Vibration online monitoring
- Semiconductor robot arm monitoring
